Awning Roof Kit – Diamond Shingles – Aluminum
Aluminum Shingle Awning Roof Kit for new or existing awnings. 0.032″ Kynar Aluminum. 10 1/2″ x 10 1/2″ Shingles.
Measure the roof WIDTH at the eave and it’s DEPTH (Rafter Length) along the slope from the eave to the wall. See the Measuring Guide to the left. Select Color.
All Pac Clad aluminum colors are available. Email us for lead times and pricing on colors not optioned on this item.
If the roof abuts brick, select the Brick Flashing. When ordering Brick Counter Flashing, Enter the flashing height necessary. To determine this, measure from the roof deck up the brick to the mortar joint you’ll be installing the Counter Flashing into.
If the roof is to be installed below manufactured stone, select the Manufactured Stone Flashing. Select “N/A” if installing under siding or abutting brick. No counter flashing is necessary for installation under siding or stucco.
Approximately 200 Nails and 200 Hold Down Clips are necessary for each 100 square feet of roof.
48 State Shipping is included.
Lead Time ~ 1-2 Weeks.