Awning Roof Kit – Rezibond Standing Seam
$0.00
Rezibond Standing Seam Awning Roof Kit for new or existing awnings. Double rolled seams are 1″ tall and 14 3/4″ on center. Left and Right end panels will be sized the same for balance.
To order: Measure the roof WIDTH at the eave and it’s DEPTH along the slope from the eave to the wall. See the Measuring Guide to the left.
Enter Dimensions for each Component below. Enter Dimensions in inches, using decimals for fractions.
If the roof abuts brick, order the Brick Flashing. Measure from the roof deck up the brick to the mortar joint you’ll be installing the Counter Flashing into.
If the roof is to be installed below manufactured stone, order the Manufactured Stone Flashing. No Counter Flashing is necessary for installation under siding.
Approximately 50 Nails and Hold Down Clips are necessary for each 50 square feet of roof. Most awning roofs will require only one pack of each.
Hand Seamers can be used to close the seams, but we provide a “lender” installation tool kit containing all tools to make installation easier. Buyer pays return shipping. 30 days free use. $5/day rental thereafter.
48 State Shipping is included.
Lead Time ~ 1-2 Weeks.
