Chimney Shroud CS114
For use on chases with metal flues or full masonry chimneys.
Select from 16oz and 20oz Bright Copper, 16oz Lead Coated Copper, or 16oz Freedom Gray Copper.
Enter the desired LENGTH and WIDTH with Fractions as Decimals. Please measure all four sides, since some chimneys/chases are not perfectly square or rectangular. Enter the larger of the Length and Width dimensions.
Select the Side Flange Height and Flue Hole Diameter for Chases. For masonry chimneys, select Square or Rectangular Flue Hole and enter width and length. The flue width and length must correspond to the entered cap width and length. Locate the Flue Hole using the E and F Dimensions.
Select Flat or Standing Seam Roof Type.
Select MESH SIZE (5/8″ or 3/4″) or NO MESH. Some jurisdictions require a 5/8″ spark arrester.
Bottom Edge of the Side Flange is Hemmed.
See the Shopping Cart for QUANTITY DISCOUNTS. Discounts will be given for multiple units of the same size.
Shipping is included for the Lower 48 States. Select the correct destination type.
Email us for quotes on multiple flue configurations or unusually shaped chases/chimneys.