Eyebrow Roof Kit – Steel Standing Seam
0.032″ Kynar Aluminum Standing Seam Eyebrow Roof Kit. Double rolled seams are 1″ tall and 12 3/4″ on center.
To order: Measure the roof WIDTH at the eave and it’s DEPTH along the slope from the eave to the wall. See the Measuring Guide to the left.
Select the Face Flange Height desired for the drip edge.
If the roof abuts brick, order the Brick Flashing. When ordering Brick Counter Flashing, enter the flashing height necessary. To determine this, measure from the roof deck up the brick to the mortar joint you’ll be installing the Counter Flashing into. Subtract an inch (for the seam height) and enter that number. For example: If you measure 5.375″ from roof deck to mortar joint, enter 4.375″.
If the roof is to be installed below manufactured stone, order the Manufactured Stone Flashing. No counter flashing is necessary for installation under siding.
Approximately 100 Nails and Hold Down Clips are necessary for each 100 square feet of roof. Most eyebrow roofs will require only one pack of each.
Hand Seamers can be used to close the seams, but we provide a “lender” installation tool kit containing all tools make installation easier.
Email us for a quote on other shapes.
Free 48 State Ground Shipping.
Lead Time ~ 3-4 Weeks