Shed Roof Kit – Valley on Both Sides – Standing Seam – Less than 8ft Rafter Length
$0.00
- Standing Seam Kit. Double rolled seams are 1″ tall and 14 3/4″ on center. Available materials include: Bright Copper, Lead Coated copper, Freedom Gray copper, Kynar aluminum (See the color chart. Colors not optioned have extended lead times – email us for a quote), Galvalume, and Rezibond.
- Pac Clad Color Chart
- To order: Measure the roof WIDTH at the eave and at the top and it’s RAFTER LENGTH along the slope from the eave to the TOP. See the Measuring Guide to the left.
- If the roof abuts brick, order the Brick Flashing. When ordering Brick Counter Flashing, enter the flashing height necessary. To determine this, measure from the roof deck up the brick to the mortar joint you’ll be installing the Counter Flashing into. Subtract an inch (for the seam height) and enter that number. For example: If you measure 5.375″ from roof deck to mortar joint, enter 4.375″.
- No counter flashing is necessary for installation under siding.
- Fasteners are included.
- Email us for a quote on other roof configurations or if ordering help is needed.
- 48 State Ground Shipping is included. Email us for other locations.
